Tên sản phẩm |
CATER EXTRA/E |
Hạn sử dụng |
|
Tình trạng |
Đang lưu thông |
Số lượt đã xác thực |
11 |
CATER EXTRA is multi-grade engine oil for the diesel engines, blended from base oil with high viscosity index. It contains additives to improve viscosity index with high stability, enhances the stability of viscosity grade; also has anti-wear, anti-corrosion, anti- oxidation… that keep the engine clean, against abrasion properties under severe conditions and extended oil drain intervals.CATER EXTRA meets standards such as SAE: 20W50; API: CI4/SL. It also uses for gasoline engines.
Thông tin chi tiết sản phẩm
STANDARD NUMBER: TCCS 99:2018/PLC
MSDS: MSSP 0801-083
DECRIPTION:
CATER EXTRA is multi-grade engine oil for the diesel engines, blended from base oil with high viscosity index. It contains additives to improve viscosity index with high stability, enhances the stability of viscosity grade; also has anti-wear, anti-corrosion, anti- oxidation… that keep the engine clean, against abrasion properties under severe conditions and extended oil drain intervals.
CATER EXTRA meets standards such as SAE: 20W50; API: CI4/SL. It also uses for gasoline engines.
MAIN BENEFITS:
- Keep engine clean.
- Good engine protection.
- Excellent anti-wear.
- Meets the requirements of engine manufacturers such as Volvo VDS, MB 229.1, MAN 271, and CAT…
APPLICATION:
CATER EXTRA provides good lubrication for high-speed turbo-charged diesel engines, operating under severe conditions; require low sludge formation on piston. It also meets engine oil requirements such as API: CI4 for diesel engine and API: SL for gasoline engine.
CHARACTERISTICS:
Characteristics
|
Methods
|
CATER EXTRA
|
20W50
|
Kinematic Viscosity at 100˚C
|
ASTM D445
|
18÷20
|
Viscosity index, min
|
ASTM D2270
|
120
|
TBN, mgKOH/g, min
|
ASTM D2896
|
9.5
|
Pour point, ˚C, max
|
ASTM D97
|
Report
|
Flash point, ˚C, min
|
ASTM D92
|
220
|
Water content, %volume, max
|
ASTM D95
|
0.05
|
Foaming characteristics at 93.5˚C, ml, max
|
ASTM D892
|
50/0
|
Metal content, %weight, min
|
ASTM D4951
|
0.1
|
Characteristics of this chart are indicative typical values that normally accepted in manufacture. However, these are not the fixed technical parameters.
PACKAGES:
For more details information, kindly contact with PLC heads office.
Cơ sở pháp lý
Truyền thông và quảng bá