AW HYDROIL 68/E

Giá tham khảo: 0 VNĐ

Thông tin nhà cung cấp

Nhà cung cấp	Tổng Công ty Hóa dầu Petrolimex
Địa chỉ	Tầng 18,19 , Số 229 Tây Sơn, Phường Ngã Tư Sở - Quận Đống Đa - Hà Nội
Điện thoại	(024) 3851 3205 - (024) 38518 066
Website	http://www.plc.petrolimex.com.vn

Từ khóa:

AW HYDROIL 68/E

Chi tiết
Nhật ký SX
Liên hệ
Đại lý
Đánh giá

Tên sản phẩm	AW HYDROIL 68/E
Hạn sử dụng
Tình trạng	Đang lưu thông
Số lượt đã xác thực	14

AW HYDROIL is blended from high viscosity index base oil and anti-oxidation, anti-wear, anti-corrosion and anti-foam additives. It provides excellent protection for hydraulic system and other equipment, which using hydraulic oil

Thông tin chi tiết sản phẩm

STANDARD NUMBER: TCCS 14:2018/PLC

MSDS: 0808-030

DECRIPTION:

MAIN BENEFITS:

Anti-wear and anti-corrosion.

Anti-foam formation.

Anti-rust and chemical corrosion.

It is an excellent protection for hydraulic system.

APPLICATION:

AW HYDROIL uses for hydraulic system of rotor, gear and piston pumps operating under high-pressure condition (above 1000psi), machines and compressors. It also uses for lubricating of crankshaft and gear operating under medium load.

AW HYDROIL meets ISO VG grades: 32, 46, 68, 100, 150, and 220.

CHARACTERISTICS	METHODS	AW HYDROIL HL
CHARACTERISTICS	METHODS	32	46	68	100	150	220
1. Kinematic viscosity at 40^oC	ASTM D445	29¸34	44¸49	64¸72	95¸105	145¸155	210¸230
2. Pour point, ^oC, max	ASTM D97	-12	-10	-9	-9	-9	-6
3. Viscosity index	ASTM D2270	97	97	97	95	95	94
4. Flash point, ^oC, min	ASTM D92	200	205	210	215	225	230
5. Foaming characteristics, max, ml	ASTM D892	50/0	50/0	50/0	50/0	50/0	50/0
6. Emulsion characteristics: 30ph, ml, max	ASTM D1401	3	3	3	3	3	3
7. Metal content (Zn), min, %weight	ASTM D4951	0.03¸0.049

Characteristics of this chart are indicative typical values that normally accepted in manufacture. However, these are not the fixed technical parameters.

PACKAGES:

209L Drum; 18L and 25L Can.
STORAGE:
All packages should be stored under cover to avoid the possible ingress of water and the obliteration of drum markings.
Product should not be stored above 60˚C, exposed to direct sunlight or freezing conditions.
HANDLING, HEALTH AND SAFETY:
This product is without significant risks to health and safety, however it needs handling and uses carefully with good hygiene standards and avoids prolonged contact with skin.
Avoid frequent contact with eyes.
Keep off the spark and flammable substances.
PLC or its subsidiaries will not accept liability if the product is used other than in the manner, with the precautions, or for the purpose specified.