STANDARD NUMBER: TCCS 57:2015/PLC

MSDS: 0804-071

DECRIPTION:

GEAR OIL 80W-90 is a lubricant, blended sulfur - phosphorous. It is suitable for lubricating hypoid gears, automotive transmission gears... that requires the standard API GL-5.

MAIN BENEFITS:

• - EP additives give perfect protection “hypoid gear” from abrasion.
  - Oil quality is sustainable at high temperature.
  - Anti rust and anti-foaming.
  - Can mix with other gear oils.

  APPLICATIONS:

• - GEAR OIL 80W-90 uses for gearbox, rear axle of vehicles operating in conditions high speed, small tension and small speed, high tension.
  - GEAR OIL 80W-90 meets the requirement of API GL-5, David Brown S1.53.101(E), AGMA 9005-D94 và DIN 51527 Part 3.

CHARACTERISTICS:

Characteristics of this chart are indicative typical values, which normally accepted in manufacture. However, these are not the fixed technical parameters.

PACKAGES:

• 200L Drum.

  STORAGE:

• All packages should be stored under cover to avoid the possible ingress of water and the obliteration of drum markings.
• Product should not be stored above 60˚C, exposed to direct sunlight or freezing conditions.

  HANDLING, HEALTH AND SAFETY:

• This product is without significant risks to health and safety, however it needs handling and uses carefully with good hygiene standards and avoids prolonged contact with skin.
• Avoid frequent contact with eyes.
• Keep off the spark and flammable substances.
• PLC or its subsidiaries will not accept liability if the product is used other than in the manner, with the precautions, or for the purpose specified.

For more details information, kindly contact with PLC heads office.